Wednesday, January 28, 2009

Rotorcraft

A rotorcraft is a heavier-than-air flying machine that uses lift generated by wings, called rotor blades that revolve around a mast. Several rotor blades mounted to a single mast is referred to as a rotor. Rotorcraft may also include the use of static lifting surfaces, but the primary distinguishing feature being lift provided by one or more rotors. Rotorcraft includes helicopters, auto gyros, gyro dynes and tilt rotors. In the United States, the Federal Aviation Administration places helicopters, auto gyros (which it calls gyroplanes), and gyro dynes in the category Rotorcraft, and tilt rotors in the category Powered lift.

A helicopter is a rotorcraft whose rotors are driven by the engine(s) throughout the flight, to allow the helicopter to take off vertically, hover, fly forwards, backwards and laterally, as well as to land vertically. Helicopters have several different configurations of one or more main rotors.

Wednesday, January 14, 2009

Airport design

Airport design and location can have a big impact on air safety, especially since some airports such as Chicago Midway International Airport were originally built for propeller planes and many airports are in congested areas where it is difficult to meet newer safety standards. For instance, the FAA issued rules in 1999 calling for a runway safety area, usually extending 500 feet (150 m) to each side and 1,000 feet (300 m) beyond the end of a runway.

This is intended to cover ninety percent of the cases of an aircraft leaving the runway by providing a buffer space free of obstacles. Since this is a recent rule, many airports do not meet it. One method of substituting for the 1,000 feet (300 m) at the end of a runway for airports in congested areas is to install an engineered materials arrestor system, or EMAS. These systems are usually made of a lightweight, crushable concrete that absorbs the energy of the aircraft to bring it to a rapid stop. They have stopped three aircraft (as of 2005) at JFK Airport.

Wednesday, January 07, 2009

Bird strike

Bird strike is an aviation term for a collision between a bird and an aircraft. It is a common threat to aircraft safety and has caused a number of fatal accidents. In 1988 an Ethiopian Airlines Boeing 737 sucked pigeons into both engines during take-off and then crashed in an attempt to return to the Bahir Dar airport; of the 104 people aboard, 35 died and 21 were injured. In another incident in 1995, a Dassault Falcon 20 crashed at a Paris airport during an emergency landing attempt after sucking lapwings into an engine, which caused an engine failure and a fire in the airplane fuselage; all 10 people on board were killed. A bird strike is suspected as causing the engines to fail on US Airways 1549 that crash landed onto the Hudson River.

Modern jet engines have the capability of surviving an ingestion of a bird. Small fast planes, such as military jet fighters, are at higher risk than big heavy multi-engine ones. This is due to the fact that the fan of a high-bypass turbofan engine, typical on transport aircraft, acts as a centrifugal separator to force ingested materials (birds, ice, etc.) to the outside of the fan's disc. As a result, such materials go through the relatively unobstructed bypass duct, rather than through the core of the engine, which contains the smaller and more delicate compressor blades. Military aircraft designed for high-speed flight typically have pure turbojet, or low-bypass turbofan engines, increasing the risk that ingested materials will get into the core of the engine to cause damage.